• Body Manufactured by reinforced high tensile steel sheet, body 5 mm thick at the bottom, 2mm thick press formed plates on
the side and 4mm thick wear resistant plates on the rear end.
• Hopper Capacity: 2 m3
• Hopper floor made from 6mm thick high tensile steel sheet.
• Sweeping panel activated by two cylinders for garbage collection.
• Packing cycle is triggered when the packing panel pushes the compressed waste into the body.
• Automatic loading and compacting cycles are performed by single “Push Button” Operation .
• Compacted waste discharge by lifting the tailgate via 2 hydraulic cylinders.
• Special rubber seal assures water tightness between tailgate and body
• Tailgate lifter suitable to handle 1,100 & 2,200-Liters bins.
• Foldable steps at rear sides for smooth operation with handles at both sides of tailgate
• Heavy duty chain provided on bin lifter
• A double acting, hard chrome telescopic cylinder positioned inside the body and linked to the internal panel allowing complete discharge of the body and ensuring constant refuse compaction.
• Front mounted control valve assures the operation of the ejector and the tailgate lifter, while another control rear mounted valve
controls the sweeping and packing panels, as well as the lifting bar
• Over pressure safety valve.Emergency stop button on both sides.
• PTO- powered Tandem pump provides adequate hydraulic oil flow and pressure for the complete unit operation. PTO is operated from the truck cabin
• Hydraulic oil tank including screened filler-breather cap, return filter and level indicator.
• External : Grit blasted to Swedish standards SA2.5, one coat of primer followed by two coats of polyurethane paint in one colour
